Free Shipping on Orders Over $135
Using GluBoost Fill n Finish as a complete finish on faceplate turnings, like bowls, plates, and turned boxes or vessels.
After your final sanding, apply Fill n Finish Thin either directly to the wood or to an application pad, and spread it evenly while the lathe is running at its slowest speed. When it’s smooth, cure it with two light sprays of GluDry. If you want a thicker finish, or a buffed gloss finish, apply a second (or third) coat the same way, again curing it with GluDry. Once the finish is to your liking, you can buff it to gloss by sanding through the grits to ultra-fine paper, then buffing with a pad loaded with rubbing or polishing compound.
There are numerous opaque pore fillers, and a handful of clear ones as well, but none work quite so fast as GluBoost Fill...
Read More →
Prepare Surface – Use Fill n’ Finish and GluBoost GluDry for pore filling and as primer sealers. Adjust nozzle tip to pattern of...
Read More →
Let’s discuss some tips on using GluBoost MasterGlu, Endpoint Mark + Mask vinyl tape, and MasterShield tape to repair a guitar nut. Nut...
Read More →
Let’s talk about some tips on here with tips on using GluBoost MasterGel Ultra, GluDry, and Fill n Finish to create beautiful custom inlaid...
Read More →
EndPoint and MasterShield Masking
Fingerboard Inlays With Fill n' Finish
Ding Repair With Fill n' Finish
